Qinghe Hongde Auto Parts Co., Ltd
NEWS CENTER
Product quality casts the brand
Motorcycle throttle line does not rebound
Time:
2021-09-15
The reason for the motorcycle throttle line is that there is no lubrication in the throttle line and the resistance is too large. The routing of the accelerator line always bends. In this case, the accelerator pedal cable can only be replaced, and there is no other solution. The accelerator cable shall be repaired in time after the problem occurs, otherwise it will have a certain impact on the vehicle driving, the accelerator cannot return, and the vehicle is in acceleration mode, which is very dangerous. Motorcycle is a kind of two or three wheeled tricycle powered by gasoline engine and controlled by the handle to turn the front wheel. It is light and fast. It is widely used in patrol, freight and other sports equipment.
The non rebound of motorcycle throttle line is caused by the jamming of throttle line or throttle handle, and the jamming of throttle valve or throttle valve and oil needle of carburetor.
1. The reason for the motorcycle throttle line is that there is no lubrication in the throttle line and the resistance is too large. The routing of the accelerator line always bends. In this case, the accelerator pedal cable can only be replaced, and there is no other solution. The accelerator cable shall be repaired in time after the problem occurs, otherwise it will have a certain impact on the vehicle driving, the accelerator cannot return, and the vehicle is in acceleration mode, which is very dangerous. Motorcycle is a kind of two or three wheeled tricycle powered by gasoline engine and controlled by the handle to turn the front wheel. It is light and fast. It is widely used in patrol, freight and other sports equipment.
2. The motorcycle throttle does not return, usually because the throttle line or throttle handle is stuck, and the throttle valve and oil needle of the carburetor are stuck. The biggest reason is resistance. In rare cases, the throttle pipeline is not lubricated, the resistance is too large, or the routing mode of the throttle pipe is bent.
3. Methods to solve the problem of motorcycle throttle not returning. Add a return spring at the position where the carburetor is connected with the throttle line. Try changing the throttle line. Check the carburetor position. Reduce the bending of the throttle line as much as possible, or make the angle of these corners mainly straight Take out the needle seat of the carburetor and grind it gently with 2000 sandpaper to help the flexibility of the throttle line.
Relevant