What should I do if the car clutch cable is interrupted during driving
Time:
2021-09-15
Many people have encountered the situation that the clutch line is broken during driving. The feeling is a "jump" sound, and the clutch pedal has no feeling in an instant. If you press the pedal with your hand, the feeling is light. There is no doubt that the clutch line is broken.
Many people have encountered the situation that the clutch line is broken during driving. The feeling is a "jump" sound, and the clutch pedal has no feeling in an instant. If you press the pedal with your hand, the feeling is light. There is no doubt that the clutch line is broken.
The cable must be abnormal before it is broken. When stepping on the clutch, it is either heavy or hairpin. There can be no omen. The stay wire is made of oil wire, and many small oil wires can't be broken at once. One must be broken first, and then all of them suddenly. It means that you usually don't pay attention to or check the condition of the car. When the clutch line is broken, it means that the clutch fails and loses this function. Without clutch, it will be very difficult to shift and start.
How to deal with this situation? If you know a little about machinery, you can connect the iron wire, and the other side can be stuck with a small clip. In this way, you can operate as usual, but the clutch stroke is either too large to separate, or too small to slip, but it will not affect you to drive to the repair shop.
If you are driving and the clutch cable suddenly breaks, don't stop. If the gear of the car is in the neutral position, you can judge the speed according to the speed at that time, gently step on the accelerator pedal, and push the gear suitable for the speed at that time at the moment when the engine speed drops from high to low. In fact, this method is to use the throttle to control the speed, and then switch gears in the process of speed rise and fall.
When the clutch cable is broken and the car is in the flameout state, we can shift the car into the first gear first and then start it. It should be noted that when starting the vehicle, control the accelerator and observe the road ahead in advance to avoid emergencies. When parking, both methods need to be in neutral in advance to avoid stalling with gear, so as to avoid damage to the gearbox.
Relevant