Qinghe Hongde Auto Parts Co., Ltd
HOME
COMPANY
Introduction
Honor
Factory
PRODUCTS
Truck series
Bus series
Agricultural series
Host matching
test
test2
test3
CASES
NEWS
Company news
Industry dynamics
Exhibition
CONTACT
English
中文版
Product quality casts the brand
Standard for tightness of motorcycle clutch line
For the method of adjusting the motorcycle clutch line, if the clutch separation is not complete due to the excessive free clearance of the clutch handle, the clutch adjusting wire can be loosened outward to lengthen the steel sheet outside the clutch line to shorten the free clearance stroke. For example, if the clutch handle is not too tight, the clutch adjusting wire can be screwed inward to increase the free clearance of the clutch handle. The free clearance of the clutch handle is about 2.5cm, which is normal.
23
2021
/
12
High speed brake failure, clutch line disconnection and so on, these emergency strategies
With the increasing number of private cars in China, self driving has become a very common phenomenon. Expressway is the most common section in the process of self driving. Unlike ordinary highways, expressways are always closed, and all vehicles travel faster. Most vehicles travel at a speed of about 100km / h. According to relevant tests, when the speed exceeds 100km / h, the safety of 99% of vehicles has been extremely fragile.
24
How long can the brake line last? Your brake line may rust and corrode
Steel brake lines are prone to rust and corrosion. Although your brake lines are made of stainless steel - designed to avoid rust - they still contain a lot of iron and will oxidize over time. The oxidation process is accelerated when steel is subjected to common weather and road conditions such as rain, snow and waves. Driving more miles leads to higher exposure rates, which means that the brake lines on commercial trucks and cars will not last as long as grocery buyers. If you drive in an area famous for rain, snow or beautiful sea scenery, the service life of the brake line will be further shortened.
30
Motorcycle throttle line does not rebound
The reason for the motorcycle throttle line is that there is no lubrication in the throttle line and the resistance is too large. The routing of the accelerator line always bends. In this case, the accelerator pedal cable can only be replaced, and there is no other solution. The accelerator cable shall be repaired in time after the problem occurs, otherwise it will have a certain impact on the vehicle driving, the accelerator cannot return, and the vehicle is in acceleration mode, which is very dangerous. Motorcycle is a kind of two or three wheeled tricycle powered by gasoline engine and controlled by the handle to turn the front wheel. It is light and fast. It is widely used in patrol, freight and other sports equipment.
04
2022
01
WECHAT
Introduce
Machinery matching
CONTACT US
Marketing
Contact
Feedback
Hongde Auto Parts Co., Ltd
Mail:autoparts01@hongdeautoparts.cn
Mob:+8615030919869
copyright © 2022 Qinghe Hongde Auto Parts Co., Ltd
Power by:300.cn SEO